9800 Series
After all these years, it is still the most durable and reliable slider on the road today.
The Hutch 9800 Series of sliders is one of our continuously evolving lines of trailer slider systems. The most versatile and reliable line of trailer sliders on the road today, the Hutch 9800 family of high-endurance sliders offers you extended service life and reduced downtime - all while allowing for dependable, durable and driver-friendly operation.
Whether your requirements are for a standard 49" tandem axle or a widespread axle application, the 9800 Series has a sliding subframe to fit your specific needs. Overall subframe heights from 8 1/2" to 10 1/2" deep (as measured from the top of the body rail to the bottom of the subframe) combined with our versatile Hutch 9700 Series suspension results in a wide variation of mounting heights and weight capacities up to 25,000 lbs./axle. With all of these features, various widths, and body rail lengths up to 328", the Hutch 9800 family of sliders can meet any of your van trailer requirements.
- Full-length slider pads are made from UHMW material.
- Symmetrical crossmembers offer more uniform stress distribution.
- "Slot welding" keeps the edges of the side rails and the crossmembers weld-free.
- Holes are pre-punched for easy air line access.
- Spring loaded, forged 1 5/8" lock pins ensure secure slider placement.
- Your choice of positive locking-pin mechanisms that offer fast, easy slider repositioning.
- High strength hold down clips front and rear help ensure slider retention and control during repositioning.
- Side rails are made from high strength low-alloy steel.
- Various axle configurations with single, 2, 3, 6, 7 or 8 leaf springs provide a wide variety of options to meet your requirements.
- Low-profile body rails are available in material thickness of .232" for maximum weight savings, or .275" for heavier-duty applications.
- Holes punched in 4" increments allow precise variations in vehicle weight distribution while providing the wheel base best suited to your needs.
The 9801/9802/9811/9812 Series sliders are all constructed of sturdy 7 gauge material designed for 49" axle spacings.
The 9801 and 9811:
The 8 1/2" deep 9801 and 10 1/2" deep 9811 both utilize the Hutch EZ-PULL pin release system.
The 9802 and 9812:
The 8 1/2" deep 9802 and 10 1/2" deep 9812 both utilize the Hutch P3 ( Pneumatic Pin Puller).
The 9821 and 9822:
These 10 1/2" deep sliders are constructed with .232" material in the side rails and are specifically designed for widespread axle applications. However, standard 49" axle spacings are also available. These models are available with either the EZ-PULL or P3 pin release systems.
The 9831 and 9832:
These models are 9 1/2" deep versions of the 9821 and 9822. They share the same design, construction and available options.